How to Connect Two TDC10 Drums for Xbox and Play "Taiko no Tatsujin" in Two-Player Mode
Follow this step-by-step guide to set up your two TDC10 drums on Xbox for an exciting two-player drumming experience!
Pre-Setup Checklist
Before beginning, make sure you’ve completed the "Rythmagica Pre-Setup Guide for Playing 'Taiko no Tatsujin' on Xbox."
Step 1: Power On Your Xbox
- Turn on your Xbox console and ensure it’s ready for setup.
Step 2: Turn Off Both Xbox Controllers
- Hold the Xbox button on each controller for approximately 6 seconds.
- Wait for the light on each controller to turn off, indicating they are powered down.
Step 3: Connect Two Xbox Controllers to TDC10 Drums
- Plug one Xbox controller into Port B of the first TDC10 (Drum A).
- Plug the second Xbox controller into Port B of the second TDC10 (Drum B).
Step 4: Set Each TDC10 to “Xbox” Mode
-
Prepare Drum A:
- Connect Drum A to your Xbox via Port A and power it on.
- Open the TDC Mate app and connect to Drum A.
- Navigate to the Settings page in the app and manually set Game Station to “Xbox.”
- Power off Drum A once the setting is saved.
-
Prepare Drum B:
- Repeat the same steps with Drum B, ensuring Drum A is powered off while setting Drum B to “Xbox” mode.
Step 5: Start Drum A
- Connect Drum A to the Xbox via Port A and power it on.
- The Xbox controller connected to Drum A should light up, indicating it’s successfully connected.
Step 6: Launch "Taiko no Tatsujin"
- Use the controller connected to Drum A to launch Steam RF and start the game.
Step 7: Start Drum B
- Connect Drum B to the Xbox via Port A and power it on.
- The Xbox controller connected to Drum B should light up, confirming the connection.
Step 8: Configure Two-Player Mode
- Follow the instructions in our Video Tutorial (link to be provided) to set up two-player mode in the game.
Need Assistance?
If you encounter any issues, please don’t hesitate to email us at support@rythmagica.net, and we’ll be happy to assist!
Enjoy drumming to the beat with your friends! 🎶